Skip to content
Skip to content

Examples and guides

From a source to a considered draft. See how it works, then make it your own.

One source. Different stories.

Switch the writing format to compare how the same facts take a different shape.

Source note

U.S. Department of Energy

Evening demand can rise as solar generation falls. Storage helps bridge the gap between production and use.

MWh measures stored energy; MW measures power delivered at one moment. They describe different aspects of a system.

Kauai’s AES Lawai project pairs solar with 100 MWh of battery storage. Converting and recovering stored energy involves losses.

Condensed from the editorial source.

Open original source
ExplainIllustrative example

Solar energy is about when electricity is used as well as how much is produced.

Picture a summer evening. People come home, cool their rooms and start cooking. Demand can rise just as solar production begins to fall. The mismatch described by the U.S. Department of Energy is about timing, not simply the number of panels installed.

Storage holds generated energy in a chemical, mechanical or thermal form and releases it later. Batteries are one option; pumped hydropower and thermal systems serve other needs. There is no single storage technology for every job.

Two measurements help explain the difference. MWh describes how much energy a system can hold. MW describes how much power it can deliver at one moment. Smoothing a passing cloud and supplying electricity for hours after sunset are different design problems.

On Kauai, the AES Lawai project pairs a solar system with 100 MWh of battery storage. That is a concrete example of combining generation and storage, rather than a promise about how long any installation will run under any conditions.

Storage does not replace generation, and conversion and recovery cause energy losses. The practical takeaway is to ask when the electricity is needed, how much power must be delivered and which service the system is intended to provide, alongside its capacity.

Writing structure
  1. Main idea
  2. Explanation
  3. Source example
  4. Takeaway
Try this format in Studio

This preview is not a live AI generation. Results vary with your source and settings.

Find your starting point

Start with a channel or the story you want to tell.

By channel4

X

Digital archive launch

1/6 More than 21 million historic newspaper pages. But an archive’s value is also about how you find the right record. Chronicling America’s move into the loc.gov collections makes that distinction worth examining. 2/6 The Library of Congress migration notice set August 4, 2025 as the redirect date for the old site. The service, launched in 2007 and updated in 2011, moved into the library’s wider digital collections infrastructure. 3/6 The collection covers every U.S. state, D.C., Puerto Rico and the U.S. Virgin Islands. The National Digital Newspaper Program continues to support digitization by cultural heritage institutions. 4/6 Readers can narrow browsing by location, subject, language and ethnicity. Image viewing, manipulation, sharing and advanced search are also improved. These tools let a research question guide the route through a large collection. 5/6 For computational researchers, the access details matter. Bulk OCR text downloads remain available, while researchers are asked to use the loc.gov API. The transition concerns data access as well as the browsing interface. 6/6 The takeaway: a digital archive is more than scanned pages. Search fields and data access shape what readers can investigate. When you assess an archive, do you look only at its size, or also at the path to a useful source? https://www.loc.gov/ndnp/migration/

Open in Studio
LinkedIn

Article to LinkedIn

When assessing a solar project, ask one more question: at what time will the electricity actually be needed? Picture a summer evening. People come home, cool their rooms and start cooking. Demand can rise just as solar production begins to fall. The mismatch described by the U.S. Department of Energy is about timing, not simply the number of panels installed. The distinction in the U.S. Department of Energy's explainer is straightforward. MWh measures energy; MW measures power. Balancing a brief fluctuation from a passing cloud and providing electricity throughout an evening are different jobs. On Kauai, the AES Lawai project pairs a solar system with 100 MWh of battery storage. That is a concrete example of combining generation and storage, rather than a promise about how long any installation will run under any conditions. Storage does not replace generation, and conversion and recovery cause energy losses. The practical takeaway is to ask when the electricity is needed, how much power must be delivered and which service the system is intended to provide, alongside its capacity. When evaluating an energy project, do we ask when its capacity will actually be needed? Source · editorial adaptation · U.S. Department of Energy https://www.energy.gov/cmei/systems/solar-integration-solar-energy-and-storage-basics

Open in Studio
Newsletter

Weekly newsletter

In this edition: the sky, energy and digital archives This edition asks how a resource becomes useful. SPHEREx creates a shared observational record; energy storage connects the time of production with the time of use; Chronicling America changes the routes into historical documents. Here are the details of each development, with the qualifications kept in view. SPHEREx’s first sky map: Reading the universe in 102 wavelengths SPHEREx has completed its first map of the whole sky. NASA announced the result on December 18, 2025. The observations span 102 infrared wavelengths invisible to the human eye. Launched in March 2025, the observatory began the survey in May and finished the first mosaic in December. Its polar orbit produces about 14.5 circuits and roughly 3,600 images each day. Earth's movement around the Sun shifts the field of view, allowing every direction to be surveyed in approximately six months. The result is a comparable all-sky record rather than a detailed view of one small region. Different wavelengths reveal information about stars, hot gas and cosmic dust. Researchers will use the measurements to estimate distances to hundreds of millions of galaxies and study their three-dimensional distribution, galaxy evolution and ingredients essential to life within the Milky Way. Three more all-sky scans are planned during the two-year primary mission. Combining them will improve measurement sensitivity. The data are free to scientists and the public. The first map is a shared research resource, to be examined alongside other observations, rather than a final answer to every scientific question. Source · editorial adaptation · NASA / JPL · 2025-12-18 https://www.nasa.gov/missions/spherex/nasas-spherex-observatory-completes-first-cosmic-map-like-no-other/ Electricity after sunset: How storage connects solar production and demand Solar energy is about when electricity is used as well as how much is produced. Picture a summer evening. People come home, cool their rooms and start cooking. Demand can rise just as solar production begins to fall. The mismatch described by the U.S. Department of Energy is about timing, not simply the number of panels installed. Storage holds generated energy in a chemical, mechanical or thermal form and releases it later. Batteries are one option; pumped hydropower and thermal systems serve other needs. There is no single storage technology for every job. Two measurements help explain the difference. MWh describes how much energy a system can hold. MW describes how much power it can deliver at one moment. Smoothing a passing cloud and supplying electricity for hours after sunset are different design problems. On Kauai, the AES Lawai project pairs a solar system with 100 MWh of battery storage. That is a concrete example of combining generation and storage, rather than a promise about how long any installation will run under any conditions. Storage does not replace generation, and conversion and recovery cause energy losses. The practical takeaway is to ask when the electricity is needed, how much power must be delivered and which service the system is intended to provide, alongside its capacity. Source · editorial adaptation · U.S. Department of Energy https://www.energy.gov/cmei/systems/solar-integration-solar-energy-and-storage-basics Historic newspapers, a new interface: Chronicling America’s digital transition More than 21 million historic newspaper pages. But an archive’s value is also about how you find the right record. Chronicling America’s move into the loc.gov collections makes that distinction worth examining. The Library of Congress migration notice set August 4, 2025 as the redirect date for the old site. The service, launched in 2007 and updated in 2011, moved into the library’s wider digital collections infrastructure. The collection covers every U.S. state, D.C., Puerto Rico and the U.S. Virgin Islands. The National Digital Newspaper Program continues to support digitization by cultural heritage institutions. Readers can narrow browsing by location, subject, language and ethnicity. Image viewing, manipulation, sharing and advanced search are also improved. These tools let a research question guide the route through a large collection. For computational researchers, the access details matter. Bulk OCR text downloads remain available, while researchers are asked to use the loc.gov API. The transition concerns data access as well as the browsing interface. The takeaway: a digital archive is more than scanned pages. Search fields and data access shape what readers can investigate. When you assess an archive, do you look only at its size, or also at the path to a useful source? Source · editorial adaptation · Library of Congress · 2025-08-04 https://www.loc.gov/ndnp/migration/ Before you go: ask about access when reading a scientific dataset, hours of use when assessing energy capacity, and discoverability when exploring an archive. These sources address different fields; their dates, scope and limitations still need to be read in their own context.

Open in Studio
Summary

News summary

SPHEREx has completed its first map of the whole sky. NASA announced the result on December 18, 2025. The observations span 102 infrared wavelengths invisible to the human eye. Launched in March 2025, the observatory began the survey in May and finished the first mosaic in December. Its polar orbit produces about 14.5 circuits and roughly 3,600 images each day. Earth's movement around the Sun shifts the field of view, allowing every direction to be surveyed in approximately six months. The result is a comparable all-sky record rather than a detailed view of one small region. Different wavelengths reveal information about stars, hot gas and cosmic dust. Researchers will use the measurements to estimate distances to hundreds of millions of galaxies and study their three-dimensional distribution, galaxy evolution and ingredients essential to life within the Milky Way. Three more all-sky scans are planned during the two-year primary mission. Combining them will improve measurement sensitivity. The data are free to scientists and the public. The first map is a shared research resource, to be examined alongside other observations, rather than a final answer to every scientific question. Source · editorial adaptation · NASA / JPL · 2025-12-18 https://www.nasa.gov/missions/spherex/nasas-spherex-observatory-completes-first-cosmic-map-like-no-other/

Open in Studio

Writing formats4

Announce

Share a development

Lead with what changed and why it matters to the reader. What changed? → Who is affected? → Supported impact → Next step, if provided

Open in Studio

Small guides. Better drafts.

Pick what you need. Follow the steps, then try it in Studio.

Choose the right writing formatDecide the order in which your story unfolds.
  1. Add your source in Studio and open Writing format.
  2. Choose Explain, Announce, Make a case or Summarize to match your purpose.
  3. Use View structure to review the section order. Set tone and length, then compare the draft against your source.
Open in Studio
Find a grounded focusBuild the opening around an idea the source supports.
  1. Add at least 80 characters of source text. Open Writing format → Focus → Find focus options.
  2. Read the source evidence behind a suggestion. Center a finding, change or practical step.
  3. Find focus options again after changing the source. Check that your opening preserves the evidence’s scope.
Open in Studio
Save a reusable formatKeep the structure, bring a fresh source.
  1. Open Writing format → Saved → New format and give it a name.
  2. Write one section per line, with 2–8 sections. Review the saved tone and length settings.
  3. Save and apply it to your next source. Formats live in this browser; source text and old claims are not saved with the format.
Open in Studio
Choose a layout that reads wellCompare different ways to present the same information.
  1. Use this page’s layout preview to compare paragraphs, bullet points, numbered lists and short lines.
  2. Use paragraphs for explanations, bullets for independent points and numbered lists for ordered steps. Keep context when shortening lines.
  3. In Studio, use Output layout to set structure, spacing, opening, closing and hashtags. Check the final text in its destination platform.
Open in Studio

Compare output layouts

Writing format shapes the argument. Output layout shapes how it reads. Compare the same notes below.

  • Evening demand can rise as solar generation falls. Storage helps bridge the gap between production and use.
  • MWh measures stored energy; MW measures power delivered at one moment. They describe different aspects of a system.
  • Kauai’s AES Lawai project pairs solar with 100 MWh of battery storage. Converting and recovering stored energy involves losses.

These layouts are illustrative previews. In Studio, use Output layout to set structure, spacing, opening, closing and hashtags.

Review before publishingCheck the evidence as carefully as the presentation.
  1. Compare numbers, dates, source links and qualifications against the original.
  2. Edit a generic opening or a weak sentence. Improve the relevant passage before regenerating a whole draft.
  3. Recheck line breaks and links in the destination platform. PostReady prepares editable drafts; it does not publish or schedule them.
Open in Studio

The reference shelf

Workflows, product help and comparisons, ready when you need them.

Now make it your own

Add your source, choose a format and build an editable draft.

Open in Studio